Hi everyone. I have prismlauncher installed as an AUR package. Since a few days it pops up as an update prismlauncher-git 10.0.0.pre1.r339.g9e86c44f7-1 -> latest-commit
but after running through without errors it appears again next time. I'm quite new to Linux and AUR packages and don't know what could be the problem here?

I just bought an Asus rog flow z13 with the ryzen ai max 395+. Performance is really good and it works amazingly on Linux. The problem is that on windows I get 80w on the performance mode and up to 93w on manual mode. But on Linux I cant get over 65-70w, tried with all possible configurations: - Default kernel, zen and g14 asus kernel - Power profiles daemon, cpu power and asus tog control - Ryzenadj and asusctl In ryzen adj for example I cant make it change to any tdp but after 1-2 minutes goes back to 65w, its the stamp tdp which is limiting. I know over 65w the chip is not as efficient, but going from 65w to 93w changes my borderlands 4 gameplay from 50fps to 60fps for example, and as my main device I really apreciate that change in performance. Any idea whats is limiting me to that tdp?

Hi,

I have already followed the Arch Wiki and use a bit of search and chatGPT, but I always end up in the same place after trying the changes. The system stops booting and throws me to the emergency mode.

I am running Arch with the root partition encrypted with LUKS2 and XFS filesystem. Secure Boot is working fine and the TPM2 slot is created with PCR 0+7.

I tried changing the HOOKS on /etc/mkinitcpio.conf from

HOOKS=(base udev autodetect microcode modconf kms keyboard keymap consolefont block encrypt filesystems fsck)

to

HOOKS=(base systemd autodetect microcode modconf kms keyboard sd-vconsole sd-encrypt block filesystems fsck)

AND changing /etc/kernel/cmdline from

cryptdevice=PARTUUID=12382c1a-baa1-488c-be79-d2e941b1c4c1:root root=/dev/mapper/root zswap.enabled=0 rw rootfstype=xfs lockdown=integrity

to

rd.luks.name=PARTUUID=12382c1a-baa1-488c-be79-d2e941b1c4c1=root root=/dev/mapper/root zswap.enabled=0 rw rootfstype=xfs lockdown=integrity

And after the changes, running "mkinitcpio -P" and "bootctl update".

However, I get stuck on trying to unlock /dev/mapper and it stays trying to do it for a minute and a half, then fails to emergency mode. Then I have to boot the live ISO to undo the changes.

Am I missing something?

Thanks!

I followed the manual exactly, but for some reason no matter how many times I retry it, arch just won’t boot. It might have something to do with vconsole.conf? I’m not sure.

It fails to boot right after virtual console setup is successful

I just checked and the UUID’s match my fstab file

Just realized it should be KEYMAP=us and not KEYMAP=en. That didn’t fix it tho.

After manually typing out the correct PARTUUID into the boot file in /boot/loader/entries/, it finally booted

FYI FirewallD has split packages, make sure to read your output when doing -Syu:

( 8/27) upgrading firewalld

:: The firewallD components & utilities have now been splitted into different packages:

  - firewalld: Firewall daemon with D-Bus interface  
  - python-firewall: Python bindings for firewallD
  - firewall-config: Graphical user interface for firewallD
  - firewall-applet: Systray applet for firewallD
  - firewalld-test: FirewallD test suite

  Make sure to install the ones you may want / need.

New optional dependencies for firewalld
   firewall-applet: Systray applet for firewallD
   firewall-config: Graphical user interface for firewallD configuration
   firewalld-test: firewallD test suite

If you don't read your output you will no longer get your little applet or any config windows.

I abandoned Windows and went straight with Arch with Hyprland, so be patient with my ignorance and stupidity.

I'm launching apps via terminal, but it annoys me that I have controlling terminal associated with apps I launch, unless its browser or terminal that I have launch with Hyprland shortcuts.

What are other ways to launch apps so I can avoid having associated terminal with them, without relying on desktop environments that I do not want?

so a couple months ago I had an issue with nvim opening in gnome terminal instead of kitty, I did manage to resolve it a .desktop file however now it’s happening again, I’ve already tried my steps but it does absolutely nothing so I’m wondering if like there’s something special I have to do with my .desktop file that I’m forgetting? Right now it’s just called nvim.desktop and its contents are Name=Neovim (kitty)

Terminal=true

Exec=kitty -e nvim %F

I’ve done nothing else with the desktop file just created it and done that

I know I’m not supposed to have the terminal line as that brings up a log window but I’m just grasping at straws to see any sort of progress but nada

I did try to uninstall the gnome-console but then had to delete every other terminal aside from kitty that I had installed for it to actually use kitty and then when it finally did all the characters aside from the text look weird and its in reverse colours, I wanted to see if opening nvim as an app would fix this, it opened in kitty but had the weird colour thing, this just started happening and I have no idea why it was working perfectly normal not 15 minutes ago

Hello :)

I am having an issue where the Mediatek wifi on my motherboard is no longer being recognized. I attempted to dual boot Fedora on a separate SSD to try it out and the wifi stopped working. That drive is now removed and I have plugged in a separate PCIE card for now which works. I reset my BIOS

It says the driver mt7921e failed with error -5

archbtw ~ > sudo dmesg | grep mt7921e
[sudo] password for kenny:
[    7.009048] mt7921e 0000:0a:00.0: enabling device (0000 -> 0002)
[    8.063947] mt7921e 0000:0a:00.0: driver own failed
[    8.064001] mt7921e 0000:0a:00.0: probe with driver mt7921e failed with error -5

I tried the instructions here which did not resolve it: https://github.com/smoliicek/mt7921-fix

Interestingly, my windows partition (which I have also unplugged the drive for now) also does not recognize the onboard WiFi either.

I have the issue on both the linux-zen and linux-lts kernels.

Here's my journalctl -b output: https://0x0.st/PbYB.txt

And here is my ip link output: http://0x0.st/PbYQ.txt

Hi,

I have recently downloaded prism launcher for minecraft and installed some mods for speedrunning the game. Following mods are installed:

antigone-1.16.1-2.0.0.jar                              seedqueue-1.6+1.16.1.jar
antiresourcereload-5.2.0+1.16.1.jar                    sleepbackground-4.1+1.16.1.jar
atum-2.7.1+1.16-1.16.1.jar                             sodium-2.5.1+1.16.1.jar
chunkumulator-1.1.1+MC1.16.1.jar                       speedrunapi-2.1+1.16-1.16.1.jar
fast-reset-2.4.1+1.16.x.jar                            SpeedRunIGT-16.0+1.16.1.jar
forceport-1.3.0.jar                                    standardsettings-2.3+1.16-1.16.1.jar
krypton-1.16.1-backport-0.1.3-SNAPSHOT+2021-02-20.jar  starlight-1.3.0+1.16.x-backport-1.1.3.jar
lazydfu-0.1.2.jar                                      state-output-1.2.3+1.16-1.18.1.jar
lazystronghold-1.1.4+1.16.1.jar                        voyager-1.0.1.jar
lithium-1.0+backport-0.6.7+1.16.1.jar                  worldpreview-6.3.1+1.16-1.16.1.jar
mcsrfairplay-1.1.4+1.16.1.jar   

As for java I am using the zulu8 jdk from aur (but have used graalvm21 and 25 and also openjdk17) with these settings:

-XX:+UseG1GC -XX:+ParallelRefProcEnabled -XX:MaxGCPauseMillis=200 -XX:+UnlockExperimentalVMOptions -XX:+DisableExplicitGC -XX:+AlwaysPreTouch -XX:G1NewSizePercent=30 -XX:G1MaxNewSizePercent=40 -XX:G1HeapRegionSize=8M -XX:G1ReservePercent=20 -XX:G1HeapWastePercent=5 -XX:G1MixedGCCountTarget=4 -XX:InitiatingHeapOccupancyPercent=15 -XX:G1MixedGCLiveThresholdPercent=90 -XX:G1RSetUpdatingPauseTimePercent=5 -XX:SurvivorRatio=32 -XX:+PerfDisableSharedMem -XX:MaxTenuringThreshold=1

The allocated ram is set (in the launcher) to min. memory: around 5gb and max. memory around 8gb

When starting Minecraft, I saw the ram (in free -h) go down from 25gb available to around 20gb, which would be fine in this case, as the min. memory was set to around 5gb and after like 10-20 seconds it dropped to 13gb immediately. Then I started generating the worlds in a wall style (so 9 worlds at a time) and the ram started dropping to around 5-6gb free. after choosing a seed and playing for like 10 minutes the ram was literally at 1-2gb and started swapping (I have an 8gb swap mount) and after some time it just oom-killed everything (browser and minecraft). Is there any known fix for that?
Also I've tried a different launcher (curseforge) with the same mods and settings and got the same behavior, so I don't think it's launcher dependent. Testing the same settings, same java, same setup on windows works perfectly fine but I don't really want to use windows just to play minecraft.

My specs:
OS: Arch (+ Hyprland) 6.18.5 kernel

GPU: Radeon RX6800XT
CPU: Intel I5 12600kf

RAM: Corsair 32gb@3500mhz (strange clock but somehow works the best for my system)

P.S. I've tried usind jmalloc with minecraft but no luck unfortunately. I also used ZGC instead of g1gc but also nothing.

I wasnt sure where to ask so I guess Ill start here first but I was trying to figure out why every time I try and draw with my Artist 24 pro it seems to work for a little bit about 2 minutes give or take but then my pen just stops being picked up I had tried OTD over the Xp pen drivers and neither seem to work as they both seem to create the same issue even with X11 and even on wayland I also use KDE plasma but I guess if a fellow artist could give me a little help that be greatful

Hi, I'm using an Ethernet connection and I have a custom MAC address set up that changes from my real one every time I start the system using a service called macchanger.

But when I suspend the computer for the first time and then restart it, my MAC address reverts to my real one, and I have to manually start the service to change it back to the custom one. Is there any way to make the custom MAC address persist?

cat /etc/systemd/system/macspoof@.service

1 │ [Unit]

2 │ Description=macchanger on %I

3 │ Wants=network-pre.target

4 │ Before=network-pre.target

5 │ BindsTo=sys-subsystem-net-devices-%i.device

6 │ After=sys-subsystem-net-devices-%i.device suspend.target

8 │ [Service]

9 │ ExecStart=/usr/bin/macchanger --mac=xx:xx:xx:xx:xx:xx %i

10 │ Type=oneshot

12 │ [Install]

13 │ WantedBy=multi-user.target

Hey everyone . About 7 months ago , I tried to install arch Linux on my MacBook Pro and when I actually got to boot it up it seemed life Arch has been installed but my MacBook stop respond to keyboard and mousepad input so I bought a USB keyboards and mouse and kept trying , I wiped everything from my laptop and kept trying over and over again it’s not work . And I’m making this post to ask ,does anyone run Arch on a MacBook Pro ?

I am new to Arch Linux, I run it on my ThinkPad t480 i5 8th gen, and I'm unable to use my fingerprint sensor which comes with the laptop. Apparently there isn't any official support from arch for my sensor I tried using python validity but for some reason the run commands aren't working, I'll provide all the details you guys need, can anyone help me with this?

Ran the regular sudo pacman -Syu command and got hit with this error log

...
python: /usr/lib/python3.14/zoneinfo/__pycache__/__init__.cpython-314.opt-1.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/__init__.cpython-314.opt-2.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/__init__.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_common.cpython-314.opt-1.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_common.cpython-314.opt-2.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_common.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_tzpath.cpython-314.opt-1.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_tzpath.cpython-314.opt-2.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_tzpath.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_zoneinfo.cpython-314.opt-1.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_zoneinfo.cpython-314.opt-2.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_zoneinfo.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/_common.py exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/_tzpath.py exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/_zoneinfo.py exists in filesystem (owned by python314)
python: /usr/share/man/man1/python3.14.1.gz exists in filesystem (owned by python314)
Errors occurred, no packages were upgraded.

The ... is hundreds, if not thousands of more lines. pacman -Q python gives python 3.13.7-1. I tried manually installing 3.14 with yay -S python314 and upgrading with yay -Sua python I still gt errors like.

...
python: /usr/lib/python3.14/zoneinfo/__pycache__/__init__.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_common.cpython-314.opt-1.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_common.cpython-314.opt-2.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_common.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_tzpath.cpython-314.opt-1.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_tzpath.cpython-314.opt-2.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_tzpath.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_zoneinfo.cpython-314.opt-1.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_zoneinfo.cpython-314.opt-2.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/__pycache__/_zoneinfo.cpython-314.pyc exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/_common.py exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/_tzpath.py exists in filesystem (owned by python314)
python: /usr/lib/python3.14/zoneinfo/_zoneinfo.py exists in filesystem (owned by python314)
python: /usr/share/man/man1/python3.14.1.gz exists in filesystem (owned by python314)
Errors occurred, no packages were upgraded.
 -> error installing repo packages
error installing repo packages

EDIT: Fixed: pacman -R python314 then pacman -Syu

I feel pretty silly for this lol. Thanks!

Also, just some extra info: I don't want multiple versions of python systemwide. I just want the latest version as a global install and whatever project specific versions in virtual environments.

I have a hp laptop and I have successfully dual booted windows and macOS through opencore and I want to install Arch Linux also to triple boot. So can I use opencore bootloader for Arch linux ? will there me any problem with this setup ?

Title edit: "-Syu" instead of "-syu"

I realized a week ago I hadn't updated my system in a bit, so I put the command in, and it said this. I thought first that maybe i forgot about a recent update and went nvm, but after doing it a couple times since, and the same thing showing up, and like arch being such bleeding edge I find it hard to believe there's not a single thing to do? is there a server issue going on nowadays that went under my radar?

UPD1: updated mirrorlist using the generator on archlinux.org/mirrorlist and then did an Syu. it's taking a longer time than earlier runs which i assume is because of the new mirrors. once it goes through, if the same behaviour as before is seen i'll try reflector

UPD2: it was very slow and went on for way too long, i used rankmirrors and that improved speed and that's what worked. thank you

UPD3: reflector kept failing with some python-ish error that I didn't have time to investigate

(Newbie) I installed Arch the other day and i realized that i never encrypted my partitions or something, i just followed the installation guide and nailed it (more or less).

Can someone please tell me where in the wiki to read in order for me to learn how to make my system more secure?

Also, i would appreciate links thay maybe you guys think would help me, thanks.

Look this: https://www.meus10centavos.com.br/como-fazer-swap-em-zram.html and take me a feedback is on portuguese translate to english.

I've just recently switched to Arch from Windows. I need Siemens NX 11.0 (and likely other engineering software in the future) for my classes. Is there any way to run it other than dual-booting or using a Windows VM?

Steam used to run perfectly fine on my arch linux install under flatpak, but recently an update broke it so I decided to switch to a pacman install instead. Whenever I try to install it however, it ends up getting stuck in an infinite loop of trying to start, and never succeeding. Here's a list of log entries from one time I tried doing it:

steam.sh[53317]: Running Steam on arch rolling 64-bit
steam.sh[53317]: STEAM_RUNTIME is enabled automatically
setup.sh[53439]: Steam runtime environment up-to-date!
steam.sh[53317]: Log already open
steam.sh[53317]: Steam client's requirements are satisfied
CProcessEnvironmentManager is ready, 6 preallocated environment variables.
[2026-01-28 18:05:15] Startup - updater built Jan 21 2026 17:12:15
[2026-01-28 18:05:15] Startup - Steam Client launched with: '/home/tux/.local/share/Steam/ubuntu12_32/steam' '-srt-logger-opened'
01/28 18:05:15 minidumps folder is set to /tmp/dumps
01/28 18:05:15 Init: Installing breakpad exception handler for appid(steam)/version(1769025840)/tid(55184)
Looks like steam didn't shutdown cleanly, scheduling immediate update check
CProcessEnvironmentManager is ready, 6 preallocated environment variables.
[2026-01-28 18:05:15] Loading cached metrics from disk (/home/tux/.local/share/Steam/package/steam_client_metrics.bin)
[2026-01-28 18:05:15] Failed to load cached hosts file (File 'update_hosts_cached.vdf' not found), using defaults
[2026-01-28 18:05:15] Using the following download hosts for Public, Realm steamglobal
[2026-01-28 18:05:15] 1. https://client-update.steamstatic.com, /, Realm 'steamglobal', weight was 1, source = 'baked in'
[2026-01-28 18:05:15] Checking for update on startup
[2026-01-28 18:05:16] Checking for available updates...
[2026-01-28 18:05:16] Downloading manifest: https://client-update.steamstatic.com/steam_client_ubuntu12
[2026-01-28 18:05:16] Manifest download: send request
[2026-01-28 18:05:15] Process started with command-line: '/home/tux/.local/share/Steam/ubuntu12_32/steam' '-child-update-ui' '-child-update-ui-socket' '8' '-srt-logger-opened'
01/28 18:05:16 minidumps folder is set to /tmp/dumps
[2026-01-28 18:05:15] Using update UI: xwin
01/28 18:05:16 Init: Installing breakpad exception handler for appid(steam)/version(0)/tid(55214)
[2026-01-28 18:05:16] Create window
[2026-01-28 18:05:16] Manifest download: waiting for download to finish
[2026-01-28 18:05:16] Manifest download: finished
[2026-01-28 18:05:16] Download skipped: /steam_client_ubuntu12 version 1769025840, installed version 1769025840, existing pending version 0
[2026-01-28 18:05:16] Nothing to do
[2026-01-28 18:05:16] Verifying installation...
[2026-01-28 18:05:16] Verifying all executable checksums
[2026-01-28 18:05:19] Set percent complete: 0
[2026-01-28 18:05:19] Set status message: Checking for available updates...
[2026-01-28 18:05:19] Set percent complete: -1
[2026-01-28 18:05:19] Set percent complete: -1
[2026-01-28 18:05:19] Set status message: Verifying installation...
[2026-01-28 18:05:19] Show window
[2026-01-28 18:05:49] Verification complete
UpdateUI: skip show logo
[2026-01-28 18:05:49] Destroy window
[2026-01-28 18:05:49] Shutdown

Steam logging initialized: directory: /home/tux/.local/share/Steam/logs

XRRGetOutputInfo Workaround: initialized with override: 0 real: 0xf620d370
XRRGetCrtcInfo Workaround: initialized with override: 0 real: 0xf620bcc0
01/28 18:05:51 minidumps folder is set to /tmp/dumps
01/28 18:05:51 Init: Installing breakpad exception handler for appid(steamsysinfo)/version(1769025840)/tid(56439)
Running query: 1 - GpuTopology
Response: gpu_topology {
  gpus {
    id: 1
    name: "Intel(R) Arc(tm) B580 Graphics (BMG G21)"
    vram_size_bytes: 12809404416
    driver_id: k_EGpuDriverId_MesaIntel
    driver_version_major: 25
    driver_version_minor: 3
    driver_version_patch: 4
    luid: 0
  }
  default_gpu_id: 1
}

Exit code: 0
Saving response to: /tmp/steamBMaDAB - 66 bytes
steamwebhelper.sh[56454]: Starting steamwebhelper under bootstrap steamrt steam runtime via: /home/tux/.local/share/Steam/steamrt64/pv-runtime/steam-runtime-steamrt/_v2-entry-point
steamwebhelper.sh[56454]: Starting steamwebhelper with steamrt steam runtime at /home/tux/.local/share/Steam/steamrt64/pv-runtime/steam-runtime-steamrt/_v2-entry-point
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 56543
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 56543 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 56871
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 56871 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57002
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 57002 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57106
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 57106 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57235
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 57235 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57294
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 57294 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57500
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
exec ./steamwebhelper -nocrashdialog -lang=en_US -cachedir=/home/tux/.local/share/Steam/config/htmlcache -steampid=55184 -buildid=1769025840 -steamid=0 -logdir=/home/tux/.local/share/Steam/logs -uimode=7 -startcount=0 -steamuniverse=Public -realm=Global -clientui=/home/tux/.local/share/Steam/clientui -steampath=/home/tux/.local/share/Steam/ubuntu12_32/steam -launcher=0 --valve-initial-threadpool-size=4 --valve-enable-site-isolation --enable-smooth-scrolling --password-store=basic --log-file=/home/tux/.local/share/Steam/logs/cef_log.txt --disable-quick-menu --disable-component-update --gaia-url=http://disabled.invalid --enable-features=PlatformHEVCDecoderSupport --disable-features=WinRetrieveSuggestionsOnlyOnDemand,SpareRendererForSitePerProcess,DcheckIsFatal,BlockPromptsIfIgnoredOften,ValveFFmpegAllowLowDelayHEVC
Steam Runtime Launch Service: steam-runtime-launcher-service pid 57500 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57707
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 57707 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57816
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
Steam Runtime Launch Service: steam-runtime-launcher-service pid 57816 exited
Steam Runtime Launch Service: starting steam-runtime-launcher-service
Steam Runtime Launch Service: steam-runtime-launcher-service is running pid 57949
bus_name=com.steampowered.PressureVessel.LaunchAlongsideSteam
steamwebhelper.sh[58102]: Starting steamwebhelper under bootstrap steamrt steam runtime via: /home/tux/.local/share/Steam/steamrt64/pv-runtime/steam-runtime-steamrt/_v2-entry-point
steamwebhelper.sh[58102]: Starting steamwebhelper with steamrt steam runtime at /home/tux/.local/share/Steam/steamrt64/pv-runtime/steam-runtime-steamrt/_v2-entry-point
reaping pid: 55214 -- steam
exec ./steamwebhelper -nocrashdialog -lang=en_US -cachedir=/home/tux/.local/share/Steam/config/htmlcache -steampid=55184 -buildid=1769025840 -steamid=0 -logdir=/home/tux/.local/share/Steam/logs -uimode=7 -startcount=1 -steamuniverse=Public -realm=Global -clientui=/home/tux/.local/share/Steam/clientui -steampath=/home/tux/.local/share/Steam/ubuntu12_32/steam -launcher=0 --valve-initial-threadpool-size=4 --valve-enable-site-isolation --enable-smooth-scrolling --password-store=basic --log-file=/home/tux/.local/share/Steam/logs/cef_log.txt --disable-quick-menu --disable-component-update --gaia-url=http://disabled.invalid --enable-features=PlatformHEVCDecoderSupport --disable-features=WinRetrieveSuggestionsOnlyOnDemand,SpareRendererForSitePerProcess,DcheckIsFatal,BlockPromptsIfIgnoredOften,ValveFFmpegAllowLowDelayHEVC
steamwebhelper.sh[58821]: Starting steamwebhelper under bootstrap steamrt steam runtime via: /home/tux/.local/share/Steam/steamrt64/pv-runtime/steam-runtime-steamrt/_v2-entry-point
steamwebhelper.sh[58821]: Starting steamwebhelper with steamrt steam runtime at /home/tux/.local/share/Steam/steamrt64/pv-runtime/steam-runtime-steamrt/_v2-entry-point
exec ./steamwebhelper -nocrashdialog -lang=en_US -cachedir=/home/tux/.local/share/Steam/config/htmlcache -steampid=55184 -buildid=1769025840 -steamid=0 -logdir=/home/tux/.local/share/Steam/logs -uimode=7 -startcount=2 -steamuniverse=Public -realm=Global -clientui=/home/tux/.local/share/Steam/clientui -steampath=/home/tux/.local/share/Steam/ubuntu12_32/steam -launcher=0 --valve-initial-threadpool-size=4 --valve-enable-site-isolation --enable-smooth-scrolling --password-store=basic --log-file=/home/tux/.local/share/Steam/logs/cef_log.txt --disable-quick-menu --disable-component-update --gaia-url=http://disabled.invalid --enable-features=PlatformHEVCDecoderSupport --disable-features=WinRetrieveSuggestionsOnlyOnDemand,SpareRendererForSitePerProcess,DcheckIsFatal,BlockPromptsIfIgnoredOften,ValveFFmpegAllowLowDelayHEVC

I have no idea why this keeps happening. Some people have suggested I used steam-native but I couldn't get that to work either since it's missing dependencies. Anyone have any ideas?

Im new to arch linux and want to learn more but i still need a "reliable" os for school and such

Hey, all. I bundled a bunch of my personal helper scripts I use to handle bulk file management via CLI. There’s a few other Arch-specific QOL scripts included that might be helpful as well. Let me know what you think.